siding contractors toronto

Why Screws Are Much better Than Nails for Vinyl Installation


Whether or not for wood, metal or vinyl siding, the devices applied to attach them to a home are referred to as fasteners. You will find screws and nails that are both sorts of fasteners. Which variety of fastener is ideal for attaching vinyl is clear as soon as you understand the properties of your material along with the methods of driving screws as opposed to driving nails.

Screws are the apparent decision for many factors.
- Vinyl can split or crack, particularly in cold temperatures and if topic to a swinging hammer or strong nail gun the effect towards the surface could destroy it. Even though the installer had been really careful.
- The speed, precision and accuracy of a energy screw driver with adjustable torque is far superior to a hand held hammer and also a nail gun.
- The penetration of a screw is additional precise than a nail and if a error is made inside the depth from the penetration, one particular or two turns within the opposite direction along with the dilemma is corrected. If a nail really should be driven also far, backing it out is practically not possible.
- The height of a screw head can be controlled. The panel must slide underneath the fasteners since it expends and contracts. Nail depths can't be controlled.
- Nails are frequently created of steel that could rust and corrode causing loss of integrity and staining with the installed product. Screws utilised for vinyl might be corrosion proof stainless steel or a different corrosion proof material.

Some of your vinyl fasteners which might be advisable are also the identical as those made use of for aluminum siding. Some excellent possibilities are those that have a penetration of no less than 3/4 of an inch and possess a head diameter of 5/16 of an inch. They should really also have a flat head bottom surface for suitable torque and significantly less binding. Some screws which are suggested by installers are #8 zinc round washer head screws and #8 pan head stainless steel screws. These are readily offered in any hardware department of any residence center or the local hardware of building supply store.

It can be advisable when installing siding contractors toronto panels with screws to start in the middle of your panel, centering the screw in the slot and functioning toward every end in each directions. Proper spacing amongst the material being installed along with the head of your screw may be achieved by taking a scrap of siding and cutting a notch or V inside the end. By slipping this under the screw head when driving it, then removing it, will bring about an even spacing involving the fastener head plus the vinyl that can be uniform from one particular for the other. This will give the finished project some breathing area.

Vinyl siding is accessible in a quite wide number of style and colors and when high quality siding is effectively installed it might add each lasting beauty and value to any property. Insulated vinyl siding also can cut down heating and cooling expenses drastically. It's very best to leave the installation of any dwelling improvement items to a licensed dwelling improvement specialist.