Sponge blasting method

The Sponge Blasting Method Is A Cleaner Alternative To Pressure Washing

There are many types and sizes of surfaces that must be cleaned or degreased in any manufacturing endeavors. Pressure washing usually does it in many of these applications. Sand blasting is the right technology for many others. Some of them, however, benefit from a newer technology that is called the Sponge blasting method. This process can be used, side by side, with others for a complete and thorough treatment of all products produce in any given area.

The issue with pressure washing is all of the water that can become a problem and sand blasting has a lot of debris as well as the replacement costs of material. The sponge blasting process works in several steps that are more controllable than either other cleaning system. It does not require water and can be cleaned up through the use of a vacuum or broom. It does not have a vapors involved with it and no chemicals are used at all.

The patina on many metal pieces as well as moss, molds and other biological growths, and many other contaminants, can be removed with this process. It can be removed from copper, hard metal alloys, tin, and cast iron, as well as other surfaces. This is a safer system than most others and can be applied so that only one layer at a time can be dealt with.

The type of building maintenance Ohio facility managers manage can be made simpler by using this kind of blasting system. Outside, inside of manufacturing areas and within production zones are all areas that can be cleaned in this way. Not only that, unlike most other blasting materials, the vast majority of the sponges can be recycled to use again.

The steps involved in a complete process for cleaning heavy build up of contaminants, such as industrial coatings and paint begins with the red sponges. It has steel grit embedded it and this is the coarse cleaning that gets the ball rolling as far as control is concerned.

The silver sponge media has aluminum oxide abrasive in them. Use these to remove paint and some other coatings in the marine, paper and petrochemical industries for which they are specifically designed. The brown media is for light cleaning and thin coatings, rust and peeling paint. White is for graffiti and sensitive surfaces because of its plastic composition. Green is a very mild abrasive and can be used as a final step for removing the grease and its ability to get into small areas that are often not visible.

Since a surface cleaned in this way can be completely cleaned, some other processes and applications can be better handled. This is just the case when dealing with Ohio epoxy floor coatings. The substrata need to be absolutely clean and clear so nothing interferes with the adhesive qualities of this application.

With less cleanup, more cleaning power and less waste, productivity can be increased. The safety factor is also something to consider. It will help to be able to inspect the surface while the cleaning is in progress, so this productivity is increased which can hit your bottom line in a good way.

Our construction site has all the latest facts you require about sponge blasting method. To reach the main homepage, simply follow this link on http://anconstructioninc.net/what-we-do-2.