How to Install Solar Tube
How to Install Solar Tube
The installation of the solar tube is the precondition of the installment of the solar geyser. And the solar tube is significant to solar geysers like stainless steel solar geyser or painted steel solar geyser. In the middle of installing the solar geyser, understanding how to install solar tube is crucial. First, the solar tubes that are used to install the solar geyser should be qualified. In addition, the weather fastness, heat resistance of the solar tubes should be favorable with light weight and certain strength. In addition, it is necessary to paint the surface of the heat collector plate and heat collector tube black to make sure the weather fastness, large adhesive force as well as high intensity. And as for how to install solar tube, the solar tube should possess high heat conductivity and smooth external wall with small flow friction. And the solar tube is not easy to be corroded to pollute the water. And its high intensity and favorable durability make itself easy to be manufactured. Therefore, the solar tube must be carried out favorable corrosion resistant steps first.
And how to install solar tube depends on suitable machines such as vertical swing machine, diehead threading machine, abrasive cutoff saw, electric hammer, electric drill, electric welding machine as well as motor test pump. As for the tools, it is needed mantle fibre plates, pipe wrench, adjustable spanner, hacksaw, pressure clamp as well as electrogas welding tools. And it also needs the leveling instrument and protractor.
And if you would like to install the solar geyser accessories on the roof, it is necessary to make protective layer on the surface of the roof and then install the solar tubes first. And make sure that the roof is able to bear the load of the solar geyser. And if it is needed to install on the balcony, it is necessary to prepare enough protective steps first and then install on the places where there are enough sunlight intensity.
Before installing, as for how to install solar tube, it is necessary to make sure the direction of the installment first. In northern hemisphere, it is suitable to install on the south direction with maximum deviation angle 15 degrees. It is necessary to make sure the heat collection and preservation quality of the solar geyser. And after installing the solar geyser, the water pressure test results of the solar geyser and full water test of the water tank should conform to the design requirement and construction specification. In addition, after installing the solar tube, it is necessary to wash or purge the whole equipment. Finally, check all the welding line and junction screws, if there is any loose phenomenon, fasten or change immediately. And there should be protective layer on the surface of the water tank with uniform color and thickness. We supply the following products: solar heating system solar powered water heater heat pipe vacuum tube