high speed USB cable

Things Should be Noted for Upon USB Cables Use

Nowadays mobile storage devices have been increasingly sophisticated, and the work has become increasingly exquisite. China cable manufacturer provide us various USB cable products. With the popularity of the USB standard, now more and more peripherals office products (such as scanner, camera, card reader, etc.) are using the USB cable, but some incorrect usage will often cause a lot of problems. So what should be noted for when we use a USB cable? The following is the answer.

1. Check before installation
Do not rush to install a new USB cable after purchase. We first look at the BIOS to check whether the USB interface has been opened, so that the problem of not being recognizable will not be considered as the product problem! Turn on the computer, press the Del key to enter the BIOS, set "USB Legacy Support" to be "AUTO", "USB Function" to be Enabled. If onboard USB3 or USB4 interfaces are used, set "Onboard USB" to be Enabled. There is, if the motherboard is old, refresh the BIOS before the USB cable, which will get better compatibility and prevent mistakes.

After the USB cable is installed, it is better to go to "Control Panel ¡ú System ¡ú Device Manager" and see if there is a device with a yellow exclamation point, so we can determine there is whether the driver is wrongly installed. If the answer is no, delete it. Then click "refresh "and manually specify the path to the driver, which can be installed properly.

2. Avoid incorrect plugging and unplugging USB products
Although products with USB interface support hot-plugging, it doesn¡¯t mean freely implement hot-plugging. First, hot-plugging cannot be carried out when high speed USB cable is working. For example, when the camera is being used, unplugging from the computer will lead to transmission error and damage the inside plate. Unplugging for the scanner in the working process is likely to provoke the problem that the scanning head cannot be reset or has deviation. Do to implement frequent plugging and unplugging in a short time, because when the product is plugged into the USB port, the system takes some time to react while immediately unplugging is likely to evoke system errors. So the best intervals for another plugging or unplugging will be more than 5 seconds later.

3. Avoid using low-grade USB cable
Sometimes out of consideration of office equipment placement, USB extension cord will be needed. But some extension cord of mixed brand has the poor quality, especially on the interface, either too loose or too tight. Being too loose is prone to cause poor contact, or even fall off and affect the ongoing work at the time of use. Being too tight will be hard to plug or unplug. If this happens numerous times, scratches on the USB port will occur, and thereby rust follows. Long extension cord is not desirable which will affect the data transmission.