How to Use a Vape

How to Use a Vape

A vape is a luxury item in which the liquid is vaporized by heating the coil, and the vapor produced is inhaled to enjoy the flavors. (The "POD type," which does not require coil replacement, is explained separately.) Here we will explain in detail how to use a vape, including coil replacement.

How to maintain your vape

A vape device should be maintained regularly, about once a week or when changing liquids. By continuing to maintain it frequently and in the correct manner, you will be able to use the device for a long time. Here is a detailed explanation of the procedure for performing maintenance on your vape.

Step 1: Disassemble the mod and atomizer

This section explains how to remove each part of the vape. First, hold the base firmly and rotate the atomizer, being very careful not to leak any liquid between the base of the atomizer and the tank. Next, disassemble the atomizer into the drip tip, atomizer, and coil.

Step 2: Clean the atomizer and drip tip

The atomizer and the drip tip need to be cleaned by soaking them in warm water. In particular, clean the "drip tip" carefully when changing the flavor of the liquid if it leaks. The liquid inside the "atomizer" should be carefully removed with lukewarm water, but if the liquid has hardened, it is best to soak the "atomizer" in warm water for about 10 minutes. Use a toothbrush to clean out the "air hole. Basically, there is no need to apply strong force when removing liquid stains, so wash gently. If the liquid cannot be cleaned with lukewarm water, a sponge and mild detergent may be used.

For all-in-one type vapes, in which the atomizer and battery are integrated into one unit, wipe the inside of the tank with a damp cotton swab and then wipe with a dry tissue or cotton swab to clean.

Step 3: Disinfect with hot water

Disinfecting the atomizer and drip tip (mouthpiece) is another essential part of vape care. After cleaning, soak the atomizer and drip tip in 65°C water for 30 minutes to sterilize them. Alternatively, you can sterilize them by boiling them in boiling water at 100°C for 15 minutes. It is important not to neglect the sterilization process, as the main ingredient of the liquid, VG (vegetable glycerin), is prone to the growth of bacteria.

Step 4: Wipe the coils dry

Coils are very delicate components, and if water seeps into the coils, it can cause malfunctions. The main coil materials from famous vape suppliers used are iron-chromium alloy called kanthal wire and nickel-chromium called nichrome wire. Kanthal wire, in particular, is prone to rusting and should not be washed in water. It is also safer to avoid handling them in places with a lot of water. Instead of washing with water, wipe off the liquid with dry paper or cloth. At this time, be careful not to wipe off the liquid adhering to the inner threads as well, otherwise it may cause leakage.

If you are really concerned about not washing it off with water, you do so at your own risk. In that case, you need to heat the vape with a firm vape after washing to evaporate the water in the wick (cotton). Also, when you vape after rinsing the coil with water, you need to have a process that allows the liquid to soak into the coil thoroughly. Otherwise, a "dry burn" or "dry hit" will occur and the coil may be damaged.

Step 5: Dry the parts and assemble

The coils, as well as other parts, are prone to rust, and must be dried thoroughly after cleaning. Make sure that even the inside of the atomizer is dry before assembling the parts. If you follow the reverse procedure of how you disassembled it before cleaning, you will be able to assemble it without any problems. When assembling, be careful not to tighten the screws too tightly; many of the threads on each part of the vape are fine, so if too much force is applied, the threads will be crushed. If this happens, the screw will close too tightly and cannot be removed.

In addition, when VAPE is sterilized by boiling, the metal parts will expand, so do not assemble it in that state. It is important to assemble it after each part has cooled completely. Glass atomizers are also deformed by heat and may not mesh well with metal parts, so do not apply heat too quickly.

Replacing the coil of a vape

When you use a vape and find that it no longer draws vapor well or produces less smoke, it is a sign that the coil should be replaced. Here we will introduce the proper timing for replacing the coils of your vape and tips on how to make your coils last longer.

2.1. Guidelines for when to replace coils

Generally, it is said that it is appropriate to replace the coils of a vape in about 2 weeks to 1 month. However, the actual timing of when the coil should be replaced depends on factors such as how often the vape is used. If you vape many times a day, the coil may deteriorate in about a week. On the other hand, if the vape is used infrequently, such as only once every few days, the same coil can be used for up to two months.

If the vape is smoking less and less even though you have not changed the settings on the unit, you should consider that the coil has deteriorated and reached the end of its useful life. Less smoke will have a direct impact on the quality of the smoke. Also, when a vape coil from different vape factories reaches the end of its life span, the taste will be affected as well, such as a bitter taste. In this case, it is also considered a good time to replace the coils. In addition, you may feel a scratchy sensation in your throat while vaping, or the liquid may discolor quickly. In such cases, it is best to replace the coil immediately, regardless of the period of use or the estimated time of replacement.

2.2. Problems that can occur if coils are not replaced

What will happen if you continue to vape without regard to the life of the coils? First, when the coil deteriorates and reaches its limit, it can no longer turn the liquid into vapor. Therefore, it is not possible to use a vape with deteriorated coils indefinitely. Secondly, if you continue to use a deteriorated coil, burnt coils will be transferred to the liquid, which will not be clean. In addition, since burnt coils are said to contain carcinogenic substances, water vapor via burnt coils may have a negative impact on health.

2.3. Coil condition at the time of replacement

Although it varies depending on the vape atomizer model, the coil is basically in the shape of a circular cylinder. The wick (cotton) and coil are stretched inside the tube, and the liquid soaked into the wick (cotton) is heated by the coil to vaporize it. As the vape is used, dirt and burnt liquid adheres to the wick, and when it is time to replace the coil, the wick is black. The burnt liquid adhering to the coil can prevent the liquid from vaporizing properly.