Crown Moulding Installation Tips

Crown Moulding Installation Tips


Crown moulding is called that because of the way it is shaped, that is, that it gets larger at the top, not because of any particular design or size. Wood and plaster are the most common, but they also make foam moulding and composite moulding. If you have walls and ceilings that meet at a 90-degree angle, you may be able to do the job yourself. You'll need a power miter saw and a coping saw to cut the moulding if you plan to do the work yourself. If you have cathedral ceilings, the job is more complicated and may require a professional. crown moulding company Follow these tips before, during, and after the installation process to make the job easier.

Before you start, hold a piece of moulding in place in a corner of the room and draw a line along the wall where the bottom edge of the moulding will sit. Make a line along every wall to give you a guide when installing the moulding by either holding a piece of moulding up and drawing the line with a pencil or by marking the corners and using a chalk line. Also mark where the studs and joints in the walls are. Make this mark below the line you've already made to mark the bottom edge of the moulding so you can still see it while you've got the moulding in place. Make a few practice cuts with the saw before you start in earnest.

Attaching the moulding to the wall and the ceiling with adhesive before nailing it in place is a good idea. This will help hold the moulding in place while you attach it with nails. It will also keep the moulding in place when weather changes the size and shape of the wood. Remember to wipe away any glue that oozes out onto the wall, ceiling, or moulding piece before it dries. Try to insert the nails or brads into a part of the moulding that bends toward the wall or ceiling, not the part that juts out into the room.

After you've installed your moulding, there are still a few things you can do to make sure it looks professional. Use caulk to fill any gaps between the wall and the moulding and between the ceiling and the moulding best finish carpentry company toronto. Fill the nail divots with spackle. Fill any seams where the moulding pieces meet with caulk. Finally, paint the moulding. If you've pre-painted the moulding, you'll still need to do some touch up where you've spackled and caulked over the nails and the seams.

Here are a couple more things to consider. If you aren't potlights installers toronto comfortable with mitering corner pieces, go with a plastic moulding that has matching corner boxes. Place these pieces in the corners to get a perfect corner joint without the need to miter your corner pieces exactly. Crown moulding decramold isn't just for ceilings, though, but also a nice addition to doorways, windows, and crown moulding Toronto kijiji.
Big image
Crown Moulding Installation Toronto