Home Insulation

Types of home insulation

Tips for Internal Insulation

Internal insulation is the process through which the walls are filled up for the purpose of conserving heat in a room or avoid heat loss that consequently produce a room cold. A building may be insulated either internally using plastered boards or installing a fiber filled stud wall, or insulated externally that isn't commonly preferred due to visual impact it could placed on a building.

Internal insulation using plasterboard

Here is the most popular insulation method as it's much easier to install and plasterboard are affordable. The plasterboard is to establish using nails or screws that are driven to the wall, plasterboard adhesive may also be used to stick it's towards the wall, and unless the wall is uneven, continuous ribbons of plaster should be adhered to.

The downside for the later is always that there may be joint cracking unlike nailing or screwing although in this method a wood preservative needs to be employed to maintain your wood from rotting. Every area including those surrounding windows and walls must be insulated simultaneously if condensation shall be avoided. Additionally door areas and edges of walls must be carefully insulated as is also the normal culprits of trapping moisture.

When installing plasterboard, a vapour control layer should be included to avoid dampness and joints relating to the boards closed up to avoid air from leaking out. The board is normally 25mm-100mm thick, the thicker it can be, the greater heat it conserves.

What to do before insulating

Know the U-worth of the plasterboard, this is the level of which heat will be lost with the wall. The minimum accepted rates are .30 watt or lower per square meter.

Whether the vapor control layer is going to be installed or how else they will ensure there won't be any dampness due to moisture condensed on the wall.

Lastly, when possible, the installer should show you a photo or give you descriptive information the wall will be after fitting in the insulators.

Why internal insulation using plasterboard is a great idea

Apart from the obvious advantage that is included with insulating: which is preventing lack of heat from a building, the opposite benefits that include this technique include.

It could stop or minimize the spread of fireplace in the case of one- the plaster adhesive needs to be applied in generous amounts at the floor and ceiling edges and also the door and window openings, it provides a fire inhibitor.

This doesn't undertake excessive space. Plasterboard occupy noticeably less space when compared with stud walls which need much space hence reduce considerably the size of a room.

However, on the downside, using this method of insulation doesn't offer enough support for heavy fittings including wash basins and this means that the fittings need to be fixed to the wall behind the plasterboard, unlike stud walls which may handle it.


It is important to observe that internal insulation may be performed by an experienced builder or even a very experienced person that has done it before. It is usually a fantastic opportunity to remodel your home in case you're planning for this later on.

For more related article visit this link : home improvement

Inspecting Insulation for Energy Efficient Homes : Checking Home Insulation Around Baffles