Phao Chi Pu
Different Kinds Of Decorating Moldings
An attractive molding can be defined as any continuous projection utilized to boost the look of a wall. In ancient Greece, these were first utilized to throw water from the wall. The contours, measurements, and projections of moldings vary greatly.
Frieze
One type of molding - the frieze (or frieze board) - was initially suited for the Parthenon on the Acropolis. The frieze is considered an element of the Greek architectural style.
The Parthenon was developed for the goddess Athena. The frieze moldings that have been used were meant to tell the storyline of her triumph over Poseidon in succeeding as the patron from the ancient city which is now Athens.
The frieze panels certainly are a series of designed pediments that are filled with the images of Athena's birth and rise to power. Today, a frieze board could be the lcd just below a crown molding or cornice. Often, low relief is applied to this panel for really decoration.
Today, frieze moldings are most frequent being a part of an enhancing molding that follows the neoclassical architecture or decorating style.
You will need a pretty high ceiling (minimum of 9 feet), and it's recommended that you stain or paint the frieze as well as the crown molding precisely the same color. The frieze is an excellent approach to visually bring the ceiling down making the area appear cozier.
Crown Molding
Crown molding is easily the most popular kind of cornice molding. Crown molding is generally a single-piece of decorative molding, installed near the top of a wall, with an angle towards the adjoining ceiling. However, I have seen crown molding assemblies of 5 or even more pieces in additional elaborate settings.
Crown molding often carries a profile that projects out on the ceiling and around the wall, adding a rich appearance with a room. It is usually used on top of cabinets or built-in furniture.
Introducing this kind of decorative molding into a not hard room offers a historic character how the room wouldn't otherwise have. Crown molding is additionally in combination with other moldings to add details to fireplace mantels and shelves. (For the purpose it's worth, this is the best architectural feature).
Crown molding can be a kind of Cornice Molding. The phrase "cornice" describes molding installed down the the surface of a wall or higher of the question. When this treatment methods are created from multiple bits of molding, it is called a "build-up cornice." The other way of cornice molding could be the Cove Molding.
Cove Molding
Cove molding is quite much like crown molding, sticking with the same application and function. The difference forwards and backwards is within the profile. Cove molding features a concave profile (which bows inward) while crown molding carries a convex (outward) profile.
While crown is most in the home in traditional settings, Cove moldings are equally comfortable in country, and even contemporary settings. You don't normally see multi-piece assemblies of cove moldings. It is possible to occasionally notice "beaded" at bottom and top for any little accent.
Entries, formal areas, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.
Kitchens along with other more functional parts of the property may be in which you will find the better design of the cove molding. Over time, coves and crowns are getting to be more compact, but most still bear the shapes and styles from the original Greek and Roman designers.
Chair Rail Molding
A chair rail can be a decorative molding that divides a wall horizontally, usually about 32" to 36" higher than the floor. They protect the walls in areas where damage might occur from people arising from chairs.
For this reason, the harder traditional chair rails may nosing in the center, with curved and beveled surfaces that taper time for the wall above and beneath the nosing.
Today, chair rails remain a typical detail in traditional interiors. They serve the decorating aftereffect of unifying the different architectural details of an area, like door and window trim, and fireplace surrounds.
Frieze
One type of molding - the frieze (or frieze board) - was initially suited for the Parthenon on the Acropolis. The frieze is considered an element of the Greek architectural style.
The Parthenon was developed for the goddess Athena. The frieze moldings that have been used were meant to tell the storyline of her triumph over Poseidon in succeeding as the patron from the ancient city which is now Athens.
The frieze panels certainly are a series of designed pediments that are filled with the images of Athena's birth and rise to power. Today, a frieze board could be the lcd just below a crown molding or cornice. Often, low relief is applied to this panel for really decoration.
Today, frieze moldings are most frequent being a part of an enhancing molding that follows the neoclassical architecture or decorating style.
You will need a pretty high ceiling (minimum of 9 feet), and it's recommended that you stain or paint the frieze as well as the crown molding precisely the same color. The frieze is an excellent approach to visually bring the ceiling down making the area appear cozier.
Crown Molding
Crown molding is easily the most popular kind of cornice molding. Crown molding is generally a single-piece of decorative molding, installed near the top of a wall, with an angle towards the adjoining ceiling. However, I have seen crown molding assemblies of 5 or even more pieces in additional elaborate settings.
Crown molding often carries a profile that projects out on the ceiling and around the wall, adding a rich appearance with a room. It is usually used on top of cabinets or built-in furniture.
Introducing this kind of decorative molding into a not hard room offers a historic character how the room wouldn't otherwise have. Crown molding is additionally in combination with other moldings to add details to fireplace mantels and shelves. (For the purpose it's worth, this is the best architectural feature).
Crown molding can be a kind of Cornice Molding. The phrase "cornice" describes molding installed down the the surface of a wall or higher of the question. When this treatment methods are created from multiple bits of molding, it is called a "build-up cornice." The other way of cornice molding could be the Cove Molding.
Cove Molding
Cove molding is quite much like crown molding, sticking with the same application and function. The difference forwards and backwards is within the profile. Cove molding features a concave profile (which bows inward) while crown molding carries a convex (outward) profile.
While crown is most in the home in traditional settings, Cove moldings are equally comfortable in country, and even contemporary settings. You don't normally see multi-piece assemblies of cove moldings. It is possible to occasionally notice "beaded" at bottom and top for any little accent.
Entries, formal areas, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.
Kitchens along with other more functional parts of the property may be in which you will find the better design of the cove molding. Over time, coves and crowns are getting to be more compact, but most still bear the shapes and styles from the original Greek and Roman designers.
Chair Rail Molding
A chair rail can be a decorative molding that divides a wall horizontally, usually about 32" to 36" higher than the floor. They protect the walls in areas where damage might occur from people arising from chairs.
For this reason, the harder traditional chair rails may nosing in the center, with curved and beveled surfaces that taper time for the wall above and beneath the nosing.
Today, chair rails remain a typical detail in traditional interiors. They serve the decorating aftereffect of unifying the different architectural details of an area, like door and window trim, and fireplace surrounds.
Chair rail doubles like a cap for wainscoting or other wood paneling. This decorative molding adds feeling of detail and charm while achieving continuity in a room by unifying the different decorative elements.
Panel Molding
Panel molding, commonly called a picture frame molding, looks like a big empty frame, which is often portion of designs on walls of old Colonial and, Georgian, and Early American homes. The location of the molding should be over the chair rail height leading to Ten to twelve inches below the ceiling.
How big is this type of decorative molding, measuring 1" to 3" wide, needs to be proportionate on the ceiling height in the room. Just like the other moldings, panel molding adds a sense charm and delicate detail into a room.
Wall framing appears with the Georgian amount of American architecture, when plaster started to replace wood panels around the walls. Panel molding is also a great way to divide walls into large, aesthetically pleasing units, with no same expense of full wall paneling.
Another use of this versatile molding is to trim openings manufactured by wider planks that are assembled as rails and styles. Often, the centers of these frames are left open. By utilizing panel moldings around the perimeter of the opening, you create the look of a photo frame.
After this decorative molding is painted within the same color because surrounding walls, you achieve a sculptural quality to a wall, adding texture and shadows. If moldings are painted in contrasting colors, they're able to create a striking 3d appearance, giving depth and dimension. This kind of treatment is popular for staircases and entries.
Baseboard & Base Molding
Baseboard molding protects the bottom of the wall from ware and tear, while hiding openings as well as other irregularities in which the wall meets the ground. Base moldings give the floor line an increased profile, and is as elaborate or simple as you want.
Whereas it's not too difficult to install chair rail on a level plane, baseboard (like crown) may be tricky if the floors (or ceilings) aren't level. For this reason, I would recommend obtaining a professional woodworker to the installing these moldings.
As you remedy to uneven floors, it is possible to put in a "shoe molding" across the bottom front edge to get the baseboard a finished look. Something else that you can do with baseboard (and also together with the toe kick of your kitchen cabinets) is incorporate accent lighting.
This is simply not in keeping with the pure traditionalist, but it's quite a nifty strategy to have accent lighting throughout the perimeter of your room. You couldn't do that until they created the small LED rope lights these days.
Rope lights appear in different lengths and colours, and could be easily installed behind baseboard. Just be a notch inside the back side of the baseboard, at the pinnacle, and run the rope lights into the notch.
This really is often found in commercial spaces, but may be included entries and hallways - specifically in contemporary homes.
Flexible Moldings
In case you have a curved wall or arch, you can sure enough have a fantastic craftsman create a curved molding for about Thrice the cost of a straight molding. Or, you should buy a versatile molding for approximately the same price because the straight one.
These permit you to install moldings onto curved surfaces or arches, devoid of the delay and cost of getting them to produced from wood. The stock profiles (you can find hundreds) is the same towards the rigid versions and they are generally compatible as much as paint finish is worried.
To get more information about phao chi pu web page: click now.
Panel Molding
Panel molding, commonly called a picture frame molding, looks like a big empty frame, which is often portion of designs on walls of old Colonial and, Georgian, and Early American homes. The location of the molding should be over the chair rail height leading to Ten to twelve inches below the ceiling.
How big is this type of decorative molding, measuring 1" to 3" wide, needs to be proportionate on the ceiling height in the room. Just like the other moldings, panel molding adds a sense charm and delicate detail into a room.
Wall framing appears with the Georgian amount of American architecture, when plaster started to replace wood panels around the walls. Panel molding is also a great way to divide walls into large, aesthetically pleasing units, with no same expense of full wall paneling.
Another use of this versatile molding is to trim openings manufactured by wider planks that are assembled as rails and styles. Often, the centers of these frames are left open. By utilizing panel moldings around the perimeter of the opening, you create the look of a photo frame.
After this decorative molding is painted within the same color because surrounding walls, you achieve a sculptural quality to a wall, adding texture and shadows. If moldings are painted in contrasting colors, they're able to create a striking 3d appearance, giving depth and dimension. This kind of treatment is popular for staircases and entries.
Baseboard & Base Molding
Baseboard molding protects the bottom of the wall from ware and tear, while hiding openings as well as other irregularities in which the wall meets the ground. Base moldings give the floor line an increased profile, and is as elaborate or simple as you want.
Whereas it's not too difficult to install chair rail on a level plane, baseboard (like crown) may be tricky if the floors (or ceilings) aren't level. For this reason, I would recommend obtaining a professional woodworker to the installing these moldings.
As you remedy to uneven floors, it is possible to put in a "shoe molding" across the bottom front edge to get the baseboard a finished look. Something else that you can do with baseboard (and also together with the toe kick of your kitchen cabinets) is incorporate accent lighting.
This is simply not in keeping with the pure traditionalist, but it's quite a nifty strategy to have accent lighting throughout the perimeter of your room. You couldn't do that until they created the small LED rope lights these days.
Rope lights appear in different lengths and colours, and could be easily installed behind baseboard. Just be a notch inside the back side of the baseboard, at the pinnacle, and run the rope lights into the notch.
This really is often found in commercial spaces, but may be included entries and hallways - specifically in contemporary homes.
Flexible Moldings
In case you have a curved wall or arch, you can sure enough have a fantastic craftsman create a curved molding for about Thrice the cost of a straight molding. Or, you should buy a versatile molding for approximately the same price because the straight one.
These permit you to install moldings onto curved surfaces or arches, devoid of the delay and cost of getting them to produced from wood. The stock profiles (you can find hundreds) is the same towards the rigid versions and they are generally compatible as much as paint finish is worried.
To get more information about phao chi pu web page: click now.