Types of Commercial Locks

Protect Your Business

Commercial Locks

Businesses are quite selective when it comes to door locks. This is because the safety of their inventory and equipment is very important. While most do have audible security alarms, a strong commercial lock will take potential thieves longer to get inside. To install a proper commercial locking system for the interior and exterior of the business, contact a commercial locksmith in Scarsdale. The expert will be able to make suggestions as far as the ideal system for your business.

Exit Control Lock

With this type of lock you have a few options. The first option is to use an exterior key locking system with no key lock on the interior. The interior portion can be a simple thumb turning mechanism. Some are battery operated so that they automatically lock when the door is completely secured. There are systems that can work both on battery power and a key locking system.

The base of this type of lock is made of cast aluminum. It creates a plate on the interior and exterior of the door around the handle itself. The aluminum is saw resistant and cannot be punctured. The piece that slides into the opposing frame is also made of this cast aluminum material. Essentially, this is the ideal locking system for the back door of your business.

Protect Your Inventory

Mortise Lock

A mortise lock is very similar to an exit control lock. A faceplate that is recessed is added to the door first. The deadbolt and knob come later. The idea of the faceplate is to add strength and durability to the lock itself while appearing to be puncture proof on the exterior. A traditional lever or handle handset is often used with a commercial grade deadbolt above it.

The purpose of the mortise lock is to create a strong lock that will take a potential thief longer to get inside the building. Should the silent alarm be tripped just from the tampering with the door, authorities are likely to arrive before the thief is able to gain entry.

These create an entire locking panel that inserts inside the door. For most of these apparatuses, multiple locks are included in one single panel.

Lever Knob Lock

Lever knob locks are generally used on the interior of a business. This is ideal for storage rooms, restrooms and dressing rooms to offer a few examples. If a lever lock is used on the exterior of a commercial space, it likely leaves the business compromised in regards to security.

While it is a good option for interiors, they are simply not strong enough to stand alone as an exterior option. If a security system is in place, this may work for an exterior lock if the general area is typically safe and has a low crime rate.

Traditional Keyed Lock

Traditional keyed locks are good for commercial office doors. Not only are these inexpensive but they are the easiest to replace should one become stuck or malfunction. With these, the exterior portion of the knob has the key hole. The interior is usually a push button or a thumb turning mechanism for privacy during meetings or to just get work done more efficiently.

Many commercial business owners often have some of these locks on-hand. Purchasing bulk amounts often gives them a discount. These are simple and can easily become damaged from being slammed frequently.

Keyless Entry System

A keyless entry system is a complex high-tech option that offers a great deal of security. The idea is to have a passcode for either each department or each employee. Department heads could have separate codes too. This helps to identify who is entering the building. In the event of employee theft, it can be determined by the code used who entered the building. It can narrow down commercial loss rather well.

This system has to be wired in and programmed as well. It can take a couple of days to complete the installation of this system. Any additional security system that might be in place should be wired in and programmed with this keyless entry system. It will prevent a lot of false alarms. Not only this, but it will also help to detect unauthorized entry attempts much faster.

Card Reader

Perhaps the most secure type of commercial lock is a card reading system. Each person that is authorized to enter a building should have an employee ID. What this will do is show the system who is coming and going without question. This should only be in place on employee entry doors. If there is a retail or client space, a different type of system will need to be in place.

Some commercial businesses use an intercom system to allow clients inside a building by buzzing them in.

Alarm Rim

Adding security to the entry and exit doors of a business is a good idea. An alarm rim is housed on the exterior of a building, in most cases. When there are doors that are meant to be emergency exits only the water and weatherproof box system should be in place on those doors. When someone accesses one of these doors when using them is restricted, an alarm will sound. In most cases, this alarm sounds at a measurement of 100 decibels or more. It is likely to echo in a warehouse situation. Some businesses use these as entry only doors too. This means that vendors can enter here but must use an alternative or approved method of exiting.

Fingerprint Lock

Fingerprint locks are high-tech locking systems that have to be programmed. What happens here is that a laser identification system is put into place and thumbprints are taken from each person that is authorized to enter the building. As employees change, some will need to be removed and others will need to be added. Both of these changes have to be done quickly, within the same day of hiring or firing. These systems are programmed into the door locking system and do require software and system upgrades from time-to-time.

Passage Lock Set

Passage lock sets are most commonly used for supply storage rooms, offices, restrooms and as an interior entrance to a break area or warehouse space. These do not commonly actually lock. In most situations this type of setup is only used to have an open means of getting from one room to another.

In warehouse situations, doors often lead from the production area to office spaces and break rooms. It is common to see this type of lock set used. For use in a bathroom or personnel office, a thumb lock is likely to be on the interior of the door.

These lock sets are not designed to use a key, but some will offer a pin-hole so that the area can be accessed during an emergency situation.

Dummy Latch

A dummy latch is usually put in place in apartment buildings where staircases are involved. There is only a latch on one side, and it is generally meant as a mode of exiting a specific area or entering a stairwell.

Some commercial companies use these as an exit-only option. It is also ideal for use in warehouses and other commercial spaces to create a dedicate workspace entry and exit point. It is a safe means of going from sanitary spaces to common areas in processing plants too. Once one door is entered, safety equipment and sterilized suits must be on in food manufacturing plants. Once the employee exits this area, the sanitary gear and safety equipment should be removed. There is often a small space between the sanitary and common areas to prevent the contamination of this equipment.

Privacy Latching System

Privacy latching systems are mostly used in restrooms and dressing rooms. On the exterior, a lever is usually in place although some do have a knob. There is not a keyhole on the exterior. A thumb lock or button can be pressed from the interior to lock the door. When the handle is turned again, the door unlocks itself.

Store Room Locks

Store room locks generally have a key hole only on one side. This is to gain entry to supplies. Most can be propped open so that no one is trapped on the interior. Some may have a flush-mounted keyhole lock that allows an employee to exit by pushing the door open. This is a convenience and is often the simplest way to designate storage rooms simply by the type of lock that is in place. Using a key and pushing the door open when your arms are full is a convenient way of exiting the space safely.

There are quite a few different locking options for commercial spaces. Most businesses use multiple types of locks depending on the door or situation they are placed in. Restrooms and general office spaces can have a more traditional key lock or lever lock. Some will also use a passage knob or button-activated privacy lock. It is important to use commercial grade items to prevent theft and intruders from entering the building. Locksmiths and technicians can suggest the most appropriate setup for your establishment.