The Condor
By: Jacky and Nathan
Step 1
Get a regular 8.5"x11" piece of copy or construction paper.
Step 2
Fold the paper in half horizontally (hamburger-style) so you end up with something looking like this.
Step 3
Fold one corner on the top most flap of paper down to the center line, so you end up with this.
Step 4
Flip the paper over and do the same.
Step 5
Unfold along the center line, so the paper looks like this.
Step 6
Fold the tip of the triangle at the top of the paper airplane down about 2 cm.
Step 7
Fold along the red line, so that one side of the flat bit at the front of the plane meets the center line. NOTE: make sure you start this fold on the center line right at the very front of the plane. Then do the same on the other side
Step 8
Refold along the center line so you end up with this.
Step 9
Fold small "semi-wings" shaped like a parallelogram, like shown. The fold should cover about 1/3 of the entire area.
Step 10
Do the same in the other side.
Step 11
Fold a wing by folding the top of the flap downward until you reach something like this.
Step 12
Flip the plane over and do the same on the other side.
Step 13
Fold out the wings into their proper shape and place the plane on its back.
Step 14
Create downward "flaps" that are about 2 cm thick at their thickest point.
Step 15
Congratulations! You've folded your advanced Condor plane!