iPad POS
iPad POS
Point of Sale Installing - Your Barcode Scanning device
A point of sale system is an extremely crucial aspect for any store. It is therefore important to ensure that the hardware used will be reliable. You simply must purchase the computer hardware devices from the local dealer who has to be able to support your current computers as well as the POS equipment. Your outlet may be made to come to any halt if the POS program you are using fails!
In this article, we'll discuss the proper method to employ when installing iPad POS hardware, mainly the bar code scanner. The first thing you will need to do is to get rid of the scanner through the packing resources it comes with. Then you will look for your Y-cable and then add it on the scanner. You then will be forced to orient the actual connector on a single end in the Y-cable to have a suitable orientation for your computer. Be aware that most computer systems usually utilize small plug that is about half the size of any pencil eraser.
The next thing you will need to accomplish while linking the bar code scanner would be to unplug the laptop keyboard from the wire from the tail of the personal computer and then hook it up to the other branch of the Y-cable. If you work with a USB scanner, after that be sure to look at the instruction manual of the scanner for your page made up of the check code with regard to setting your current scanner to ensure the computer in order to detect it as a Hardware device. When you have finished programming the scanning device from the linen, you can proceed with the guidelines on the USB scan program code page.
Following everything is done and you would like to check if the actual scanner is working, you can easily go to the DOS order shell and after that try encoding any item. You should be able to see your barcode with the preceding At symbol soon after the folder prompt, along with following it'll be a bad order or document name information. That communication is what would go to your computer and also the ComTrac.
It is that simple. You will should just configure the particular barcode code reader well to be working properly. Some other POS products you will also have to install add the receipt printing device and the money drawer. After that you will have to manage the point of selling whereby you will possess open the POS system and then manage it to the particular equipment package that you are using with the aid of instructions through the point of sale recommendations manual.
For more information, my site