Horizontal Machining Center
Buy Used
Mitsubishi M-H80E
Mitsubishi M-H80E CNC
Specifications:
X-Axis Travel: 49.2"
Y-Axis Travel: 39.4"
Z-Axis Travel: 33.5"
Pallet Size: 31.5" x 31.5" Table
Load Capacity: 4,400 Lbs.
Rapid Travers Rates: 1574 IPM
Spindle Nose: Cat 50
Spindle Speeds: 35 - 6,000 RPM
Spindle Motor: 37.5 HP
Twin Tool Magazine Capacity: 238
Maximum Tool Diameter: 9.4" / Length: 19.7"
Machine Dimensions (Approx.): 50' x 16.5' x 12'
Machine Weight (Approximately): 33,000 Lbs.
Twin chip augers
Chip Conveyor: 142" x 48" x 61" 2,000 lbs.
Mitsubishi MH80E horizontal cnc mill
Machine Layout
The Mitsubishi Horizontal Flexible Manufacturing System
is made up of modules combined by Mitsubishi to collectively handle multi-pallet jobs with a generous 10 pallet pool. The tool magazine is actually two magazines combined with a robotic arm that bridges the two standard magazines for abundant capacity of 238 tools.
The robust 50 taper spindle is chilled by a massive Daikin chiller unit mounted on a stand over the hydraulic unit for better use of space. The spindle is also equipped with a Sumijet thru the spindle hi pressure pump and filter unit for chip displacement. In addition to that there is a Renshaw receiver already connected to the control to the spindle nose to provide the capability of probing.
Software, programs and support documentation are with the machine and are ready for operation. Inside the enclosure are twin chip augers that evacuate to a large chip conveyor which sits in a coolant pan. The machine has a clean looking surround that encloses the back and tool changer side of the machine with multiple access doors.
The robust 50 taper spindle is chilled by a massive Daikin chiller unit mounted on a stand over the hydraulic unit for better use of space. The spindle is also equipped with a Sumijet thru the spindle hi pressure pump and filter unit for chip displacement. In addition to that there is a Renshaw receiver already connected to the control to the spindle nose to provide the capability of probing.
Software, programs and support documentation are with the machine and are ready for operation. Inside the enclosure are twin chip augers that evacuate to a large chip conveyor which sits in a coolant pan. The machine has a clean looking surround that encloses the back and tool changer side of the machine with multiple access doors.
Plate
Model: MH80E
Serial Number: CH 4530
Date: July 1998
Serial Number: CH 4530
Date: July 1998
Renishaw Receiver
Books included
Loading Station
Call Today: (610) 513-2000
Bostock-CNC
Peter D. Bostock
Service Manager
Service Manager
Email: peter@bostock-cnc.com
Website: www.bostock-cnc.com
Location: 16 West Indian Lane, Norristown, PA
Phone: (610) 513-2000
TERMS & CONDITIONS (PARTIAL)
Unless otherwise agreed to, in writing, all machines are sold "As-is, Ex-site" with payment due in full, via certified funds, prior to shipment. Quoted prices are subject to change without notice and are exclusive of taxes, duties, shipping and handling. All machines are subject to prior sale and we reserve the right to correct any errors or omissions. Specifications herein are assumed correct but are not binding and verification of all details is the sole responsibility of the buyer. We encourage your personal or videotape inspection, prior to the sale, of this machine to confirm accuracy of the quotation.